After equipment, making solid contact is the next aspect of spinning your wedges. In this case solid contact actually means 2 things. One it means hitting the golf ball on the center of the clubface. Two it means having a clean lie where the club can contact the ball without hitting grass first. The pros you see on TV spin the ball because they make solid contact. More specifically they make solid contact lower on the face. This produces the most spin possible. If you are hitting wedge shots that don’t spin, there is a good chance you are making contact higher on the face. This usually comes from scooping or trying to get the club under the ball. While there is no direct correlation to hitting down and creating spin, there is a correlation to hitting down and making solid contact. That’s what we are looking for.
If you don’t already do it, focus on hitting down, leaning the shaft towards the target at impact, and taking a divot with your wedges. It will make you hit it more solid, which in turn will put more spin on the ball. As far as the lie goes, you must have a clean lie to spin the ball. This means no grass sitting between the clubface and the ball. Any grass or debris (besides sand) that gets between the face and ball will drastically reduce spin. It basically means that if you’re in the rough, don’t expect the ball to back up on the green.